Table of Contents
Advertisement
MW1122 User Manual
payload encapsulation formats. WFQ works properly only with
IP-based protocols. If the flow is IP-based but is encrypted using IPSec
or PPP encryption, then WFQ cannot identify the flows correctly. In
this case, the default flow is used and the default flow is treated as a
single flow.
5
Technical specifications
Features
ADSL
Physical layer
ADSL line connector
ATM over ADSL
ATM connections
Service categories
Encapsulations
Ethernet interface
Ethernet
Encapsulation
Ethernet connectors
Wireless LAN interface
Wireless LAN
Data connector
Routing
Routing protocols
Other
Class of Service
32
ANSI T1.413 Issue 2 (ANSI ADSL), ITU-T
G.992.1 (ITU-T ADSL), and ITU-T G.994.1
(Handshake) compatible.
RJ-11
PVC, up to 8 virtual circuits
UBR
RFC2684 ETH-LLC, RFC2684 IP-LLC,
RFC2364 PPP-VC, RFC2364 TUNNELED-
PPP-VC
10Base-T, half duplex
DIXv2 (transmit), IEEE 802.3 and DIXv2 (re-
ceive)
RJ-45
IEEE 802.11b DSSS
PC Card slot type 2
RIPv1, RIPv2, and static routes
NAPT, IGMP proxy, DHCP server, DNS relay,
PPTP local tunneling
Weighted fair queueing
E Copyright Nokia Networks Oy
C33902002SE_00
Advertisement
Table of Contents
