Nokia MW1122 User Manual page 11

MW1122 User Manual
3.1.4 WLAN Clients page
On the WLAN Clients page you can enable access control based on the
MAC addresses of your wireless LAN clients. When access control is
enabled, only the wireless stations on the Client table are allowed
access to your wireless network. On this page, you can also activate
Wired Equivalent Privacy (WEP) and set the encryption key
parameters. Note, that unless you have encryption enabled other
WLAN clients nearby have the possibility of monitoring the traffic on
your wireless network
Figure 7
Enabling access control
You can add a wireless station to the Client table by typing its MAC
address to the MAC address field and clicking the Add new button. Use
10
WLAN Clients page
E Copyright Nokia Networks Oy
C33902002SE_00