Specifications - Pioneer RM-05 Operating Instructions Manual

Specifications

Type
System Total Capabilities
Frequency Response (–10 dB)
Maximum Sound Pressure Level
Input Sensitivity
High EQ
Mid EQ
Low EQ
Cross Over Frequency
Amplifier
Amp Output
Input connectors (balanced input)
Input connectors (unbalanced input)
Impedance
Speaker
Enclosure
Woofer (LF driver)
Tweeter (HF driver)
Power unit/other
Supported voltages*
Power consumption
Power consumption during standby mode
External dimensions W × H × D
Weight
* Differs depending on the region of use.
Specifications and design subject to possible modification without notice, due to improvements.
© 2015 PIONEER CORPORATION. All rights reserved.
RM-05
Bi-amp 2-way active speaker
45 Hz to 50 kHz
104 dB SPL (peak @ 1 m)
–40 dB to +6 dB
Can be Adjusted, –4 / –2 / 0 / +2 dB at 10 kHz
Can be Adjusted, –4 / –2 / –1 / 0 dB at 140 Hz
Can be Adjusted, –4 / –2 / 0 / +2 dB at 50 Hz
1.7 kHz
LF: 50 W / 4  , Class AB
HF: 50 W / 4  , Class AB
Bass reflex/Aluminum die-cast
13 cm (5 in.) cone
3.8 cm (1.5 in.) hard dome
100 V (50 Hz/60 Hz), 110 V to 120 V (50 Hz/60 Hz), 220 V to 240 V (50 Hz/60 Hz)
142 W
0.3 W or less
203 mm x 281 mm x 225 mm
8.0 in. x 11.1 in. x 8.9 in.
9.3 kg (20.5 lbs)
RM-07
40 Hz to 50 kHz
109 dB SPL (peak @ 1 m)
1.6 kHz
LF: 100 W / 4  , Class AB
HF: 50 W / 4  , Class AB
XLR × 1
RCA × 1
10 k
16.5 cm (6.5 in.) cone
3.8 cm (1.5 in.) hard dome
195 W
0.3 W or less
244 mm x 337 mm x 260 mm
9.6 in. x 13.3 in. x 10.2 in.
12.3 kg (27.1 lbs)
11
En