Surface Cooking; Lighting A Gas Surface Burner; Manually Lighting A Gas Surface Burner; Flame Size Selection - Samsung NX58H5650W Series User Manual

surface cooking

BEFORE USING THE SURFACE BURNERS, make sure to follow all the safety
warnings and precautions listed on page 8. Failure to do so could result in product
WARNING
damage, personal injury, and/or death.

LiGHtiNG A GAS SurfAce BurNer

Make sure all surface burners are positioned and
assembled properly.
1. Push in and turn the control knob to the LITE
position. You will hear a "clicking" sound
indicating the electronic ignition system is
working properly.
2. After the surface burner lights, turn the control
knob to adjust the power setting of the surface
burner and turn off the electronic ignition
system.
We highly recommend using the left rear side burner for simmering tomato sauce
and right rear side burner for melting chocolate

mANuALLy LiGHtiNG A GAS SurfAce BurNer

If a power failure occurs, the surface burners can still be lit manually.
Use extreme caution when manually lighting a surface burner.
1. Hold a long gas grill lighter to the surface burner you want to light.
2. Push in and turn the control knob for that burner to the LITE position.
3. After the burner has lit, set the control knob and the burner to the desired setting.

fLAme SiZe SeLectioN

Flames larger than the bottom of the cookware will not result in faster heating, but
could result in a fire hazard and/or personal injury.
WARNING
The flames on the burners should always stay under the cookware. The flames should
never extend beyond the bottom surface and/or up the sides of the cookware.
Always watch the flames when adjusting the heat setting with the control knob(s). The
flames should always match the size of the cookware being used.
22_ surface cooking