Shift Range Positions; Maximum Allowable Speeds; Using Engine Braking - Toyota AVALON 2005 Manual

Shift range positions

D
"5" (Fifth range):
The most suitable gear is selected au-
tomatically between first and overdrive
(fifth) gears according to the vehicle
speed or driving conditions.
D
"4" (Fourth range):
The most suitable gear is selected au-
tomatically between first and fourth
gears according to the vehicle speed
or driving conditions. Slight engine
braking will be obtained on a downhill
road. Smooth running with less shifting
will be obtained on an uphill road.
D
"3" (Third range):
The most suitable gear is selected au-
tomatically between first and
gears according to the vehicle speed
or driving conditions. This range is to
be used when stronger engine braking
is necessary.
D
"2" (Second range):
First or second gear will be selected
automatically according to the vehicle
speed or driving conditions. This range
is to be used when engine braking
stronger than that of the "3" range
position is necessary.
'05 AVALON_U (L/O 0501)
D
"1" (First range):
The gear is fixed in first regardless of
vehicle speed or driving conditions.
This range is to be used when maxi-
mum engine braking is necessary.
If you attempt to downshift the transmis-
sion when it is not possible to downshift
due to high vehicle speed, a warning tone
sounds twice.

Maximum allowable speeds

To get on a highway or to pass slower
traffic, maximum acceleration may be nec-
essary. Make sure you observe the follow-
ing maximum allowable speeds in each
range:
range km/h (mph)
third
1 59
2 106
3 165 (103)
NOTICE
Do not downshift if you are going
faster than the maximum allowable
speed for the next lower range.
I n f o r ma t i o n P r o v i d e d b y :
When the "S" mode indicator light does
not come on even with the selector lever
moved to the sequential position, there
may be a problem somewhere in the
system. Have your vehicle checked/re-
paired by your Toyota dealer as soon as
possible. In this case, you can drive in
the same condition as in the "D" position.
(d) Using engine braking
To use engine braking, you can downshift
the transmission as follows:
D
When driving in the "D" position—
Shift the selector lever to sequential
position.
When driving in the "5" range within
the sequential position—
(37) Move the selector lever down to the
(66) "- " side to select the "4" range.
The transmission will
fourth range and engine braking will be
enabled.
Vehicles with cruise control or dynamic
laser cruise control—When the cruise
control is being used, engine braking
can not be enabled because the cruise
control is not cancelled.
2005 AVALON from Jan. '05 Prod. (OM41408U)
downshift to
163