Evaluating Results - Sanitas SBC 53 Instructions For Use Manual

Hide thumbs Also See for SBC 53:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 20
• If a connection to the app cannot be established after
30 seconds, the Bluetooth
blood pressure monitor switches off automatically after
30 seconds.
Please note that you must add the blood pressure
monitor in "My devices" in the "HealthCoach" app to
enable data transfers. The "HealthCoach" app must
be active to allow data transfer.
If the latest data is not displayed on your smart-
phone, repeat the data transfer as described in
chapter 7.
If you forget to turn off the blood pressure monitor, it will
switch off automatically after approximately 3 minutes. In
this case too, the value is stored in the selected or most
recently used user memory and the data is transferred
automatically after 3 minutes if Bluetooth
has been activated.
• Wait at least 5 minutes before taking an-
other measurement.
®
symbol
goes out and the
®
data transfer

6. Evaluating results

Cardiac arrhythmia:
This device can identify potential disruptions of the heart
rhythm when measuring and if necessary, indicates this after
the measurement with the symbol
This can be an indicator for arrhythmia. Arrhythmia is a condition
in which the heart rhythm is abnormal because of flaws in the
bioelectrical system that regulates the heartbeat. The symptoms
(skipped or premature heart beats, pulse being slow or too fast)
can be caused by factors such as heart disease, age, physical
make-up, excess stimulants, stress or lack of sleep. Arrhythmia
can only be determined through an examination by your doctor.
If the symbol
is shown on the display after the measure-
ment has been taken, repeat the measurement. Please ensure
that you rest for 5 minutes beforehand and do not speak or
move during the measurement. If the symbol
frequently, please consult your doctor.
Self-diagnosis and treatment based on the measurements can
be dangerous. Always follow your GP's instructions.
Classification of measurements:
The measurements can be classified and evaluated in accord-
ance with the following table.
29
.
appears

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents