Haier A2FE735CXJ User Manual page 24

MAINTENANCE
Door reversibility: mounting door from the left
A) Take the central hinge, and with the aid of pliers, unscrew
the pin, turn it upside down and re‐fasten it on the hinge.
B) With the help of a normal screwdriver, withdraw the three
hole‐covers of the central cross piece from the left, and re‐
install them on the right.
A) Take the central hinge and turn it through 180
B) Fasten it with the screws on the left of the central cross‐piece.
A) Remove the top hinge from the refrigerator door;
B) With the aid of pliers, unscrew and remove the screws on the top of
the hinge, then loosen and remove the pin on the bottom of the hinge;
then re‐install the screw, shim and pin by the opposite direction;
A) Take the refrigerator door, and insert it on the pin of the central hinge;
B) Fit the upper hinge on the door and take it toward its location on the
appliance;
C) Insert the hinge slot on the screw at the left.
Transfer the display cable located in the slit above the
refrigerator door from left to right, always keeping it inside the
slit, and connect it to the electric cable which is extending from
the cabinet above the cabinet;
A) Click‐fit the hinge cover, firstly to clip the electric cable into the
hinge cover, then clip it to the hinge;
B) Install the small cover to the right side of the front panel from
bottom to top direction;
C) Click‐fit the front panel from top to bottom direction, applying
pressure on several points to secure the bottom clips being inserted
into the slit of the cross beam;
D) Secure it with four screws;
E) Fit the clips on the left sides (previously removed);
F) Click‐fit the front panel onto the refrigerator door.
23
℃;