Receive Realplayer Settings - Nokia N92 User Manual

In RealPlayer, you can only open an rtsp:// URL address.
However, RealPlayer
To stream content over the air, select a streaming link
saved in Gallery, on a web page, or received in a text
message or multimedia message. Before live content
begins streaming, your device connects to the site and
starts loading the content. The content is not saved in
your device.

Receive RealPlayer settings

You may receive RealPlayer
message from the service provider. See
settings" on page 40. For more information, contact your
service provider.
Change the RealPlayer settings
Select Options >
Video — to have RealPlayer
clips after they finish playing.
Connection — to select whether to use a proxy server,
change the default access point, and set the port range
used when connecting. Contact your service provider for
the correct settings.
30 Copyright © 2007 Nokia. All rights reserved.
recognizes an http link to a .ram file.
settings in a special text
"Data and
Settings and from the following:
automatically repeat video
Proxy sett.:
Use proxy — To use a proxy server, select Yes.
Proxy serv. address — Enter the IP address of the proxy
server.
Proxy port number — Enter the port number of the proxy
server.
Glossary: Proxy servers are intermediate servers
between media servers and their users. Some service
providers use them to provide additional security or
speed up access to browser pages that contain sound
or video clips.
Netw. sett.:
Default access point — Scroll to the access point you want
to use to connect to the internet, and press
Online time — Set the time for
from the network when you pause a media clip playing
through a network link. Select
Enter the time, and select OK.
Lowest UDP port — Enter the lowest port number of the
server's port range. The minimum value is 1024.
Highest UDP port — Enter the highest port number of the
server's port range. The maximum value is 65535.
Select Options > Advanced settings
bandwidth values for different networks.
.
RealPlayer to disconnect
User defined, and press
to edit the
.