Keypad Lock (Keyguard); Volume And Loudspeaker Control - Nokia N92 User Manual

Bluetooth connectivity is on.
Data is being transmitted using Bluetooth
connectivity.
A USB connection is active.
An infrared connection is active. If the indicator is
blinking, the device is trying to connect to the other device
or the connection has been lost.
Mobile TV is on.
Recording is on in Mobile TV.

Keypad lock (keyguard)

Use the keypad lock to prevent the keys from being
accidentally pressed.
To turn on the display light when the keypad lock is on,
press the power key.
• To lock: In the standby mode, press
When the keys are locked,
display.
• To unlock in the Fold open or View mode: Press
then .
When the keypad lock is on, calls may be possible to the
official emergency number programmed into your device.

Volume and loudspeaker control

To increase or decrease the ,volume level when you have
an active call or are listening to a sound, press the side
volume key.
The built-in stereo loudspeaker allows you to speak and
listen from a short distance without having to hold the
device to your ear.
To turn on the loudspeaker during a call, select
Activate
To turn off the loudspeaker, select
handset.
To turn the loudspeaker on or off during a call, select
Loudsp.
, then .
is shown on the
,
Warning: Do not hold the device near your ear
when the loudspeaker is in use, because the
volume may be extremely loud.
loudsp..
or Handset.
Tip! You can also activate the loudspeaker by using
the View mode.
Copyright © 2007 Nokia. All rights reserved.
Options >
Options > Activate
7