Automatic Simplex Check (Asc); Transmitting A Tone; Memory - Kenwood TS-2000 Instruction Manual

AUTOMATIC SIMPLEX CHECK (ASC)

You can also use ASC functions on the 144 MHz and
430 (440) MHz bands of the sub-receiver. While
using a repeater, ASC periodically monitors the
strength of the uplink frequency to check the signals.
Press and hold [TF-SET] until "[R]" appears on the
SUB band display.
Refer to "AUTOMATIC SIMPLEX CHECK" {page 34}
for function and control details.

TRANSMITTING A TONE

You can assign another Tone to the sub-receiver.
Refer to "TRANSMITTING A TONE" {page 33} for
function and control details.

MEMORY

You can also utilize all the memory functions
{page 58}, including Quick Memory {page 64}, while
you are operating the sub-receiver. However, the
operating frequency range is limited to the sub-
receiver's frequency coverage. You cannot recall any
memory channels that are outside the the sub-
receiver's frequency coverage. These channels are
automatically skipped when they are recalled on the
sub-receiver.
48