Table of Contents
Advertisement
3 How to Start Duplicating HDD
How to Start Duplicating HDD?
1. Start Duplication
Step 1
Prepare a source HDD and target HDD (*It is strongly recommended to the size of
source and target are the same)
Note
ㅦ SATA interface applies on the duplicator, no matter SATA 1.0/2.0/3.0 are all supported.
ㅦ Assemble adaptor is required if user needs to copy device with other interface, e.g. IDE.
Step 2
Place source HDD at source port, targets HDD to other ports.
Source HDD
Target HDD
8
Advertisement
Table of Contents
