Table of Contents
Advertisement
How to Start Duplicating HDD 3
❷ Set Tolerance of Bad Track
Select function 6.2 Skip Error to set the number of error you accept to skip
during copy process. If the HDD is very critical for content correctness, it is
strongly recommended to keep the Skip Error to be "0".
3. Troubleshooting of Copy Fails
ㅦ Too many bad track in HDD causes copy fail.
ㅦ To check the setting of 6.2 Skip Error.
ㅦ Make sure SATA cable is connected properly.
ㅦ Make sure the capacity of source HDD is smaller than target.
13
Advertisement
Table of Contents
