Table of Contents
Advertisement
Figure 12. Removing the memory module shield
5. Open the retaining clips and gently pull the memory module out of the memory slot.
Figure 13. Removing the memory module
6. Position the new memory module over the memory slot. Ensure that the notch
module aligns correctly with the slot key
down into the slot until the retaining clips close.
Figure 14. Installing the memory module
7. Press the memory module shield downward as shown to secure the memory module.
Figure 15. Installing the memory module shield
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 54.
52
ThinkCentre X1 User Guide
2
on the system board. Push the memory module straight
1
on the memory
- Quick Links:
- Hardware Locations
Hide quick links:
Advertisement
Table of Contents
