Advertisement
Getting Started - cont'd
fig. 2
fig. 3
2
Fit one side of the Sonic Lift
Sonic mop head first, making sure that the scrub
side is facing down, then using the lavender loop,
pull the pocket over the head. Attach the hook and
loop quick fasteners on the top of the pocket to
secure in place. (fig. 2)
3
Snap the mop head into the mop body by lining up
the groove on the back of the mop body with the
groove on the back of the mop head. Push until you
hear it "click" into place. (fig. 3)
4
Turn the water tank cap counter clockwise and
remove from the tank. (fig. 4)
Use the filling flask and pour water into the tank. Do
not overfill. Replace the cap on the water tank.
(fig. 5)
4
TOLL FREE: 1-800-798-7398
cleaning pad onto the
™
IMPORTANT: Do not use on unsealed wood or
unglazed ceramic floors. On surfaces that have
been treated with wax or some no wax floors, the
sheen may be removed by the heat and steam
action. It is always recommended to test an isolated
area of the surface to be cleaned before proceeding.
We recommend that you check the use and care
instructions from the floor manufacturer.
NOTE: To prolong the life of your Steam Mop, we
recommend using distilled water.
fig. 4
fig. 5
Advertisement
