Unsatisfactory Washing Result - Miele G 1143 SCi Operating Instructions Manual

Unsatisfactory washing result

Problem
The dishes are not
clean.
Smearing appears
on glassware and
cutlery, there is a
bluish sheen on
the surface of
glassware; film can
be wiped off.
Downloaded from DishWasher-Manual.com Manuals
Possible cause
The dishes were not loaded
correctly.
The programme was not
powerful enough.
There is some stubborn
soiling although most of the
crockery is only lightly soiled
(e.g. with tea stains).
Not enough detergent was
dispensed.
Items are blocking the path
of the spray arms.
The filter combination in the
base of the wash cabinet is
not clean or is not correctly
fitted. This may cause the
spray arm jets to get
blocked.
The non-return valve is open
and blocked. Dirty water has
flowed back into the wash
cabinet.
The rinse aid dosage is set
too high.
Problem solving guide
Remedy
See notes in "Loading the
dishwasher"
Select a more intensive
programme. See
"Programme chart".
Use the "Adjust sensor wash"
function (see "Additional
functions").
Use more detergent, or
change your detergent.
Rearrange the items so that
the spray arms can rotate
freely.
Clean and/or fit the filter
combination correctly. Clean
the spray arm jets. See
"Cleaning and care".
Clean the drain pump and
the non-return valve. See
"Cleaning the drain pump
and non-return valve".
Reduce the dosage. See
"Before using for the first
time".
49