Restore Original Settings; Telephone Settings; Call Settings - Nokia E51 User Manual

consecutive incorrect PIN code entries, the code is
blocked, and you need to use the PUK code to unblock
it before you can use the SIM card again.
To set the keypad to lock automatically after a defined
period, select Phone and SIM card
autolock period.
To set a time-out after which the device is
automatically locked and can be used only if the correct
lock code is entered, select
Phone autolock
out in minutes, or select
period. When the device is locked, you can still answer
incoming calls, and calls may still be possible to the
official emergency number programmed into your
device.
To set a new lock code, select
Lock code. The preset lock code is 12345. Enter the
current code and then the new code twice. The new
code can be 4-255 characters long. Both alphabets and
digits can be used, and both uppercase and lowercase
alphabets are possible. The device notifies you if the
lock code is not properly formatted.
To set the device to ask for the lock code when an
unknown, new SIM card is inserted into your device,
select Phone and SIM card
changed. The device maintains a list of SIM cards that
are recognised as the owners cards.

Restore original settings

To restore the original device settings, select
116
settings. To do this, you need your device lock code.
After resetting, the device may take a longer time to
Keypad
>
Phone and SIM card
period. Enter a number for the time-
None to set off the autolock
Phone and SIM card
Lock if SIM card
>
power on. Documents, contact information, calendar
entries, and files are unaffected.

Telephone settings

Select Menu
Select from the following:
Call — Define general call settings.
•
>
Call divert
•
"Call divert," p. 37.
Call barring
•
"Call barring," p. 38.
Network
•

Call settings

>
To display your phone number to the person you are
calling, select
the network determine whether your caller ID is sent,
select Set by
To display your net call address to the person you are
calling using a net call, select
call ID > Yes.
To be notified of a new incoming call while you have a
call in progress, select
Options > Activate. To check if the function is active
on the network, select
To select whether net calls alert or not, select
Internet call
Factory
with a notification.
Tools Settings > Phone.
> >
— Define your call divert settings.
— Define your call barring settings.
— Adjust the network settings.
Call Send my caller ID
>
network.
Call Send my internet
>
Call Call waiting
>
Options Check
>
alert. You are notified of missed net calls
See
See
> Yes. To let
>
status.
Call
>