Nokia COMMUNICATOR 9210I Network Setup page 4

1. Open Internet startup from Desk or from under Extras.
2. Select WAP access and press Open.
3. Fill in the following settings.
Contact your WAP service provider for the correct settings.
Name - Create a name for the access point that you can recognise easily.
Secure connection - Choose whether to Use secure connection, according to your
service provider's instructions.
Internet access – From a selection list, choose the Internet Access Point (IAP) you want
to use for this connection. If you have no configured IAP's, you can create a new one by
pressing New Internet access.
Gateway IP address - Type in the IP address that the WAP gateway uses.
4. Press Close to exit the WAP access point settings.
2.2 SETTING A HOME PAGE
1. Press the Internet button and open the WAP application.
2. Press the Menu key, and open the Settings dialog under the Tools menu.
3. To activate the Home page tab, press the Menu button.
4. Type in the WAP home page URL.
5. Choose the WAP access point you want to use.
6. Press Done to exit the WAP settings.
2/2