Confirm SIM service actions
•
services," p. 68.
Help text activation
— to select whether the device
•
shows help texts
Start-up tone
— The device plays a tone when it is
•
switched on.
Enhancements
This menu or the following options are shown only if
the device is or has been connected to a compatible
mobile enhancement.
Select
Menu
Settings
> Enhancements. Select an
>
enhancement, and depending on the enhancement,
from the following options:
Default profile
— to select the profile that you want
•
to be automatically activated when you connect to
the selected enhancement
Automatic answer
— to set the device to answer
•
an incoming call automatically after 5 seconds. If
Incom. call alert:
is set to
automatic answer is off.
Lights
— to set the lights permanently On. Select
•
Automatic
to set the lights on for 15 seconds after
a keypress.
Text phone
— Select
Use text phone
•
this setting instead of headset or loopset settings.
Configuration
You can configure your device with settings that are
required for certain services. Your service provider may
—
See "SIM
Beep once
or Off,
Yes
to use
>
also send you these settings.
service," p. 12.
Select
Menu
Settings
>
>
the following options:
Default configu- ration settings
•
service providers saved in the device. To set the
configuration settings of the service provider as
default settings, select
Options
Activate default in all applications
•
the default configuration settings for supported
applications
Preferred access point
•
points. Scroll to an access point, and select
Options
Details
to view the name of the service
>
provider, data bearer, and packet data access point
or GSM dial-up number.
Connect to service provider support
•
download the configuration settings from your
service provider
Device manager settings
•
the device from receiving software updates. This
option may not be available, depending on your
device.
See "Software updates over the air," p. 48.
Personal configu- ration settings
•
add new personal accounts for various services and
to activate or delete them. To add a new personal
account if you have not added any, select
new; otherwise, select
the service type, and select and enter each of the
required parameters. The parameters differ
according to the selected service type. To delete or
activate a personal account, scroll to it, and select
or Activate.
Options
Delete
>
See "Configuration setting
Configuration
and from
— to view the
Set as
default.
>
— to activate
— to view the saved access
— to
— to allow or prevent
— to manually
Add
Options
Add
new. Select
>
47