Packet Data; Data Transfer; Transfer Contact List - Nokia CLASSIC 3110 User Manual

If you are concerned about security, turn off the
Bluetooth function, or set
Hidden. Always accept only Bluetooth communication
from others whom you trust.

Packet data

General packet radio service (GPRS) is a network service
that allows mobile devices to send and receive data
over an internet protocol (IP)-based network.
To define how to use the service, select
Settings Connectivity
>
data connection and from the following options:
When needed — to set the packet data connection
•
to established when an application needs it. The
connection will be closed when the application is
terminated.
Always online
•
connect to a packet data network when you switch
the device on.
You can connect the device using Bluetooth wireless
technology or USB data cable connection to a
compatible PC and use the device as a modem to enable
GPRS connectivity from the PC.
To define the settings for connections from your PC,
select Menu Settings
>
data Packet data settings
>
point, and activate the access point you want to use.
Select Edit active access point
point, enter a name to change the access point settings,
and select OK. Select
44
the access point name (APN) to establish a connection
to a network, and select OK.
My phone's visibility
Menu
Packet data
> >
— to set the device to automatically
Connectivity
> >
Active access
>
Alias for access
>
Packet data access point, enter
Establish an internet connection by using your phone
to as a modem. See "Nokia PC Suite," p. 68.
set the settings both on your PC and on your device, the
PC settings are used.

Data transfer

Synchronize your calendar, contacts data, and notes
with another compatible device (for example, a mobile
device), a compatible PC, or a remote internet server
(network service).
>
Packet
Your device allows data transfer with a compatible PC
or another compatible device when using the device
without a SIM card.

Transfer contact list

To copy or synchronize data from your device, the name
of the device and the settings must be in the list of
transfer contacts. If you receive data from another
device (for example, a compatible mobile device), the
corresponding transfer contact is automatically added
to the list, using the contact data from the other device.
Server sync and
list.
To add a new transfer contact to the list (for example,
Packet
a mobile device), select
Connectivity
contact Phone sync
>
settings according to the transfer type.
If you have
PC sync are the original items in the
Menu Settings
>
Data transfer Options
> >
or Phone copy, and enter the
>
Add
>