Precautions and advice Precautions and advice • The water supply tap must be shut off and the plug should be removed from This appliance was designed and the electrical socket at the end of every manufactured in compliance with international cycle and before cleaning the appliance safety standards.
Page 3
Saving energy and respecting the environment Saving water and energy • Only begin a wash cycle when the dishwasher is full. While waiting for the dishwasher to be filled, prevent unpleasant odours with the Soak cycle (if available, see Wash Cycles). •...
Product Data (product fiche) Product Fiche ARISTON Brand LTB 6M019 Model Rated capacity in standard place settings (1) Energy Star Rating Comparative Energy Consumption (kWh/year), CEC 0.860 Energy Total (kWh), E t 1,39 Average measured Standby Power (W), P s 12.0...
Installation Under no circumstances should the water inlet hose be cut If the appliance must be moved at any time, keep it in an as it contains live electrical parts. upright position; if absolutely necessary, it may be tilted onto its back.
Advice regarding the first wash cycle (depending on the The machine has a buzzer/set of tones After the installation, remove the stoppers from the racks and dishwasher model ) to inform the user that a command has the retaining elastic elements from the upper rack (if any). been implemented: power on, cycle end etc.
Description of the appliance Overall view Upper rack Upper spray arm Tip-up dispensers Rack height adjuster Lower rack Lower spray arm Washing filter Salt dispenser Detergent and rinse-aid dispensers Data plate **** Control panel Control panel Select wash cycle button Low Salt indicator light ON-OFF/Reset button and indicator light...
Refined Salt and Rinse Aid Average salt dispenser Only use products which have been specifically designed Water Hardness Table capacity duration for dishwashers. Do not use table salt or industrial salt. level °dH °fH mmol/l months Follow the instructions given on the packaging. 0 - 6 0 - 10 0 - 1...
Loading the racks Tips Several dishwasher models are fitted with tip-up sectors Before loading the racks, remove all food residues from the They can be used in a vertical position when arranging dishes crockery and empty liquids from glasses and containers. No or in a horizontal position (lower) to load pans and salad bowls preventive rinsing is needed under running water.
Page 10
Tip-up compartments with adjustable position The upper rack can be adjusted for height based on requirements: high position to place bulky crockery in the lower rack and low The side tip-up compartments can be positioned at three different position to make the most of the tip-up compartments/sectors heights to optimize the arrangement of crockery inside the rack.
Detergent and dishwasher use Starting the dishwasher Measuring out the detergent Good washing results also depend on the correct amount of 1. Open the door and press the ON/OFF button. detergent being used. Exceeding the stated amount does not 2. Measure out the detergent. (see measuring detergent). result in a more effective wash and increases environmental 3.
Wash cycles Wash-cycle data is measured under laboratory conditions according to European Standard EN 50242. Based on the different conditions of use, the wash-cycle duration and data can change. The number and type of wash cycles and options may vary depending on the dishwasher model. Wash cycle Approximate Water...
Care and maintenance Cleaning the filters The filter assembly consists of three filters which remove food residues from the washing water and then recirculate the water. They must be cleaned if you wish to achieve the best results in every wash. Clean the filters regularly.
Troubleshooting Whenever the appliance fails to work, check for a solution from the following list before calling for Assistance. Problem: Possible causes / Solutions: The dishwasher does not start • The water supply tap is not turned on. or cannot be controlled. •...
Assistances Assistance Before contacting Assistance: • Check whether the problem can be resolved using the Troubleshooting guide (see Troubleshooting). • Restart the programme to check whether the problem has ceased to exist. • If the problem persists, contact the Authorised Technical Assistance Service. Never use the services of unauthorised technicians.
Need help?
Do you have a question about the LTB 6M019 and is the answer not in the manual?
Questions and answers