Chapter 8. Replacing Hardware; General Information - Lenovo ideacentre Y800 Maintenance Manual

Chapter 8. Replacing hardware

Attention: Do not remove the computer cover or attempt any repair before reading the "Important safety
information" in the Safety and Warranty Guide that was included with your computer. To obtain copies of the
Safety and Warranty Guide, go to the Support Web site at:
http://consumersupport.lenovo.com

General information

Pre-disassembly instructions
Before proceeding with the disassembly procedure, make sure that you do the following:
1. Turn off the power to the system and all peripherals.
2. Unplug all power and signal cables from the computer.
3. Place the system on a flat, stable surface.
General information
Pre-disassembly instructions
Before proceeding with the disassembly procedure, make sure that you do the following:
1. Turn off the power to the system and all peripherals.
2. Unplug all power and signal cables from the computer.
3. Place the system on a flat, stable surface.
© Copyright Lenovo 2015 25