Prepare Your Mobile; Get Started With Bt Total Broadband; Ready, Steady Go; Connect Your Mobile To Bt Wireless Broadband - Nokia BT FUSION 6136 Setup Manual

1

Prepare your mobile

Insert your BT SIM card Charge your battery fully
1
To install the SIM card, do the following: 1. Connect the charger to a standard wall outlet.
1. Press firmly and slide the top of the back cover 2. Insert the charger plug into the round jack in the
to release it; then continue sliding the back bottom of the phone. If the battery is completely
cover to remove and lift it from the phone. discharged, it may take a few minutes before
2
the charging indicator appears on the display
or before any calls can be made.
2. Slip a fingernail under the metal tab at the
base of the phone and lift up to unlatch and
3. Disconnect the charger from the phone when the battery is fully
swing the SIM card holder open.
charged. You can use the phone while the charger is connected.
3, 4 The charging time depends on the charger and the battery used.
3. Slide the SIM card into the holder as shown,
For example, charging a BL-4C battery with the AC-4 charger
bevelled corner first, with the gold coloured
takes approximately 1 hour and 10 minutes while the phone is in
contacts on the SIM card face up, away from
the standby mode.
the phone. (See diagram)
Switch on your mobile
4. Swing the SIM card holder closed. The gold
Press and hold the end key until the phone
coloured contacts on the SIM card meet the
gold coloured contacts on the inside of the turns on or off. If the phone asks for a PIN,
5 enter the code (1210), and select OK.
phone. Gently press the SIM card holder into
the phone until it clicks into place.
Copy your phonebook to your new mobile
5. Insert the battery by positioning it (with the
To find out how to copy your phonebook to your new mobile, please
hologram label side facing up) so the gold-coloured
6 refer to your handset user guide.
contacts match up with those on the phone. Slide
the battery in until it snaps into place.
6. Slide the back cover until it locks into place.
Save your phonebook before porting your number
• Finally, remove your BT SIM card and insert into your new
BT Fusion mobile
Ensure that you save your phonebook before you port your
Check your voicemail
number, otherwise you will lose all your existing names and
numbers when you swap SIM cards. To do this:
Any text messages, voicemail messages and personal greetings
•
Save your existing phonebook from your old SIM onto your you have on your old SIM card will be lost, so make a note of
existing mobile anything important before you swap SIM cards.
• After you port your number, insert your newly activated BT
SIM card into your existing mobile and copy the phonebook
to this SIM
03
19471 BT Fusion Consumer_Nokia_65-8 5-8
2

Get started with BT Total Broadband

Before you use BT Fusion ensure your BT Home Hub installation is complete and your BT Total Broadband service is working.
Check your BT Home Hub's Broadband and Internet lights are steady green.
Please note: The Wireless light may also flash.
TROUBLESHOOTING
Whatever your query, we're here to help.
Phone Wireless Broadband Internet Data
Call Customer Services on 0800 783 2326.
3

Connect your mobile to BT wireless broadband

If your Nokia 6136 and BT Home Hub arrived in the same delivery, your mobile will already be set up to use BT Fusion
so you can benefit immediately from great call rates. This will be clearly marked on your mobile.
However, if you already have a BT Home Hub and only received a Nokia 6136 in your current order, you will need to set up BT Fusion by
following the simple step-by-step instructions below.
1
2
From the Home Screen
Highlight Available Networks
select Menu, Settings,
and press Select.
Connectivity, WiFi.
04
3 5
Your mobile lists available networks. You are now successfully
Highlight the BTHomeHub-XXXX, connected to a BT wireless
broadband network.
then, select Options and Connect.
You will be prompted "Add
If the phone asks "Disconnect
BT Openzone first?" select Yes. BTHomeHub-XXXX to your
saved networks". Select Yes.
Please note: if you see more than
Then Select OK.
one BT HomeHub-XXXX, choose the
one that matches the ID on the grey The Wi-Fi Network indicator
label on the back of the hub displays when you are
connected to a BT wireless
( See step 4 below)
broadband network.
4
Enter the Password and select Continue.
WiFi status indicators
The Password is the wireless key
that is displayed in the GREY box on Wi-Fi Signal strength indicator. This shows the strength
the label located on the back of your of your current wireless broadband connection. The GREEN DOT
BTHomeHub. indicates that a call over Fusion is possible. If the GREEN DOT is
replaced by an Antenna, you are using a the BT Mobile network
connection.
TIP
Note: To enter a number quickly, press and hold
If in range of the Home Hub you will also see the Wireless
a number key until the number appears.
icon active on your Home Hub
Wi-Fi Antenna. This shows that you are connected to the BT
wireless broadband network when it is a bright Antenna. When
Wi-Fi is disconnected, the Antenna is light grey.
Secure access point. This shows a secured wireless network.
You will need a password or network key to connect to Wi-Fi.
Saved network. Your mobile will automatically connect to a
saved network whenever that network is in range.
Active network connection. This shows your mobile is
connected to a Wi-Fi network.
4

Ready, Steady Go

Now you are set up and ready to start making great value calls and can enjoy fast internet surfing using your Fusion enabled mobile.
Remember too that with your phone already set up to use BT Openzone you can connect immediately to any of the thousands of
BT Openzone hotspots, recognisable by the distinctive BT Openzone sign or by viewing available wireless networks on your
mobile screen.
Please note: Ensure that you have these icons present . The GREEN DOT icon will let you know when a Fusion
call is possible.
Note: Your Home Screen will flash between the networks it is connected to. For example you may see BT and BT HomeHub-XXXX
alternate. This indicates that you are in range of both GSM and Wi-Fi networks. Any calls made will be on BT Fusion.
05 06
22/12/06 11:05:58