Call Forward - Nokia 9210644 User Manual

Anykey answer — to answer an incoming call by briefly pressing any key, except the left and
right selection keys, volume keys, power key, or end key.

Call forward

1. Select Menu > Settings > Config. > Phone > Call forwarding (network service).
2. Select which calls you want to forward, for example, Voice calls.
3. Select the desired option. For example, to forward voice calls when your number is busy
or when you reject an incoming call, select If busy.
4. Select Options > Activate and the phone number to which you want to forward the calls.
Several forwarding options can be active at the same time.
Network
To set the phone to indicate when it is used in a cellular network based on microcellular
network (MCN) technology and to activate cell info reception, select Menu > Settings >
Config. > Phone > Network > Cell info display.
Connection
Select Menu > Settings > Config.> Connection and from the following:
Bluetooth — to turn Bluetooth connectivity on or off, and edit Bluetooth settings. See
"Bluetooth connection settings," p. 45
Data Cable — to edit USB settings. See
Destinations — to define the connection methods used for reaching a particular destination
Data counter — to set the data counter connection and access points
Wireless LAN — to show available WLANs and test connectivity
Data call — to set the online time for the data call connection. The data call settings affect
all access points that use a GSM data call.
Video Share — to set video sharing on or off, SIP profile, video saving, preferred memory, and
alert note
SIP configuration — to set or edit the default or existing profile
Configurations — to view and delete configuration contexts. Certain functions, such as web
browsing and multimedia messaging, may require configuration settings. You may receive
the settings from AT&T.
APN control — to add new access point names
Applications
To view and edit the settings of applications installed to your phone, select Menu >
Settings > Config. > Applications and from the following:
RealPlayer — to set video repeat on or off and streaming proxy and access points.
Voice recorder — to set recording quality and memory in use.
.
"USB data cable," p. 46
.
43