Miele PW 6065 Vario Operating And Installation Instructions page 9

~
This machine must only be connected to the on-site water supply
using a new hose kit. Old hoses must not be re-used. Check the
hose regularly for signs of wear. Change in good time to avoid the
risk of leaks and subsequent damage.
~
Faulty components must only be replaced by genuine Miele
original spare parts. Only when these parts are fitted can the safety
standards of the machine be guaranteed.
~
Do not connect the machine to the mains electricity supply by an
extension lead or a multi-socket adapter. These do not guarantee
the required safety of the machine (e.g. danger or overheating).
~
If this machine is being used in a commercial environment please
ensure that all relevant health and safety regulations are obeyed.
~
This machine must not be used in a non-stationary location (e.g.
on a ship).
~
Please observe the instructions in "Installation and connection"
and "Technical data".
~
The socket must be easily accessible after installation in order to
disconnect the washing machine from the electricity supply.
~
For hard-wired machines, the all-pole isolator provided on-site
must be easily accessible after installation in order to disconnect the
washing machine from the electricity supply.
~
In areas which may be subject to infestation by cockroaches or
other vermin, pay particular attention to keeping the machine and its
surroundings in a clean condition at all times. Any damage which
may be caused by cockroaches or other vermin will not be covered
by the guarantee.
Warning and Safety instructions
9