Hotpoint HS2321L Service Information page 14

Indesit Company
CONNECTING THE LOW END ADAPTOR - 2007 Version with single and twin cable
IMPORTANT:
1. ALWAYS unplug the appliance from the mains electricity supply when connecting or
disconnecting wiring on the module.
2. ALWAYS connect the smart card reader or Hardware Key to the Low End Adaptor BEFORE
connecting the adaptor to the module PCB connection L4. Ensure correct orientation of the pins.
3. When using the converted Low End Adaptor with the twin cable, ALWAYS insulate the open
end of unused connector block with PVC tape to prevent it coming into contact with any other
items, before connection the mains supply.
The photos below only show the method of connecting the Low End Adaptor (2007) to the module
connection L4. These photos do not show the other wiring connections for the appliance.
When connecting the low end adaptor to the module in the appliance you should temporarily
reassemble the control box and make sure that it is safe before connecting the mains power supply.
Low End Adaptor
Connector
Connection L4
Module
Hardware Key Connection
Unused connector
(see text)
These photos show a 2007 Adaptor which has
been converted using C00275571 twin cable.
2007 Adaptors which have not been converted
may also be used to program the module.
Service Manual UK
Low End Adaptor
Hardware
Module
Key
Smartcard Reader Connection
To avoid damage to the plastic smartcard
containing the programming file, insert the
smartcard reader into the Low End Adaptor
BEFORE inserting the smartcard.
Note: Smartcards can only be used ONCE.
14 of 17
Smartcard Reader
English