Steam Ironing; Ironing Without Steam - Philips GC3500 series User Manual

3 Put the mains plug in an earthed wall socket.
The amber temperature light goes on (Fig. 6).
,
4 When the temperature light goes out, wait a while before you
start ironing.
The temperature light goes on from time to time during ironing.
Using the appliance
Note: The iron may give off some smoke when you use it for the first time.
This stops after a short while.

Steam ironing

1 Make sure that there is enough water in the water tank.
2 Set the recommended ironing temperature (see chapter
'Preparing for use', section 'Setting the temperature').
3 Set the appropriate steam setting. Make sure that the steam
setting is suitable for the set ironing temperature: (Fig. 7)
- 1 - 2 for moderate steam (temperature settings 2 to 3)
- 3 - 4 for maximum steam (temperature settings 3 to MAX)
Note: The iron starts to produce steam as soon as it has reached the
set temperature.
Note: If the selected ironing temperature is too low (MIN to 2), water may
drip from the soleplate (see chapter 'Features', section 'Drip stop').

Ironing without steam

1 Set the steam control to position 0 (= no steam) (Fig. 3).
2 Set the recommended ironing temperature (see chapter
'Preparing for use', section 'Setting the temperature').
39_000_8219_2_DFU Booklet_A6_v1.indd 9
ENGLISH
9
18/07/14 14:06