Water Level; Loading The Washer; Load Articles - Speed Queen AWNA62 User Manual

Hide thumbs Also See for AWNA62:
Table of Contents

Advertisement

W A R N I N G
Do not wash or dry items soiled with
vegetable or cooking oils. Some oils
may remain after washing and may
cause the fabric to catch on fire by
itself.

Loading the Washer

NOTE: Always add detergent first.

Load Articles

Load items by the amount of space they take
up, not by their weight. Mix large and small
items in a load to get the best washing
results.
Drop items loosely into the washtub. The bulk
of the clothes rather than the weight will
determine load size. Do not pack items in or
wrap them around the agitator. Overloading
can cause poor cleaning, excessive wrinkling
and tears.
Items should move freely through the wash
water for best cleaning results. Items should
rollover, sink and then reappear.
Mini
Small
Medium
Extra Large
W527
TLW1992N
TLW1992N
1-2 permanent press shirts or 2 pillow cases or 1 lightweight dress or similar size
load
3-4 permanent press dress shirts or 1 twin sheet, 1 pillow case or 1-2 lightweight
dresses
6-7 permanent press shirts or 2 twin sheets, 2 pillow cases or 8 standard bath
towels, 6 wash cloths
8-9 shirts, 5 pair polyester pants or 2 queen size sheets, 4 pillow cases,
2 nightgowns, 1 pair men' s pajamas or 1 queen size bedspread
© Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT
When washing very large items, do not fill
washtub as full as with other loads.

Water Level

The water level in your washer should fit the
size of your wash load. Small loads will use
lower water levels. There must be enough
water in the washtub to allow items to move
and turn over freely.
Wrong Water Level for
Size of Load
Overloading the washtub can result in poor
washing and rinsing.
Overloading may also cause wrinkling and
tearing of items.
IMPORTANT: If in doubt, always use a higher water
level. Most average loads will require a water
setting between Medium and Extra Large. Failure
to have the correct volume of water relative to
the load will increase the incidence of excessive
lint.
Reset (OPTIONAL)
Use the RESET if agitation has started and
more water is needed for the load.
Load Sizes
-6-
202920
Right Water Level for
Size of Load
TLW1993N
TLW1993

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents