Call Waiting; Call Holding - Nokia 7110 User Manual

• Send DTMF (to send DTMF tone strings stored in the phone
book, for example, passwords or bank account numbers)
• End all calls (to end all active calls)
• Phone book (to access the phone book)
• Menu (to access the menu)
• Mute (to mute the phone's microphone)
• Swap (to switch between the active call and the call on hold).
• Transfer (to connect the active call and the call on hold and
to disconnect yourself from the calls).

Call waiting

This network service allows you to answer an incoming call while
you have a call in progress if you have activated the menu function
Call waiting service (Menu 4-2-4).
1 Press Answer or
2 To switch between the two calls, press Swap or
3 To end the active call, press
time, press Options, roll to End all calls and press OK.)
Tip: If you do not want to answer the call, you can ignore it
or reject it. To reject the call, press Options, then roll to
Reject and press OK.
If you have activated the call divert Divert if busy, a
rejected call will also be diverted (see page 26).

Call holding

This network service allows you to make another call while you have
a call in progress.
1 Key in the phone number and press
Alternatively, press Hold and then make the second call.
2 To switch between the two calls, press Swap or
3 To end the active call, press
22
. The first call is put on hold.
, (or to end both calls at the same
. The first call is put on hold.
.
ã
1999 Nokia Mobile Phones. All Rights Reserved.
.
.