Remove Blower Pipes - Echo PB-255LN Operator's Manual

PB-255LN
5. Align groove (H) in fan-head pipe with tabs (G), and slide
fan-head pipe over main pipe until there is light resistance.
Do not force connection.
6. Hold main pipe, and turn fan-head pipe clockwise, engaging
positive locking channels until connection is firm.
Note: Blower use will eventually loosen pipe connections.
Exclusive positive locking system allows pipes to be
tightened. If loosening occurs, remove fan-head pipe,
and install according to instructions 5 & 6.

Remove Blower Pipes

1. Release locking ring (C) with a coin or screwdriver, and
rotate ring so that lock symbol (A) is at top of ring.
2. Remove pipes from locking ring.
X7501186400
©10/2014 ECHO Inc.
Blower Pipe (main)
ASSEMBLY
G
H
Blower Pipe
15