Nokia 6708 User Manual page 68

U s i n g t h e A p p l i c a t i o n P r o g r a m s
Accepted Callers
Accepted callers are those whose calls can reach you. Others will
be automatically rejected.
1. Select from the following options in the
drop-down menu:
• All callers: Everyone can call you.
• All except listed callers: Everyone can call you except the
ones in the rejected caller list. Tap the
add callers to the list.
• None: No one can call you.
2. Tap Done to exit.
Add to Contacts
If this function is activated, after a call has ended, if the phone
number is not already stored in the Contacts application
program, you will be asked if you want to add it.
1. Tap the Add party to contacts
On. To deactivate this function, tap Off.
2. Tap Done.
Auto redial
If an outgoing call is failed to connect to the network, you can
choose to redial the number automatically or to be prompted to
make the call again.
1. Tap Off, Auto redial, or Prompt redial
set Auto redial.
2. Tap Done to exit.
57
Copyright ©2006 Nokia All right reserved
Accept calls from
Add new button to
drop-down menu and select
in the drop-down list to
Call Costs
The call costs function allows you to set a limit for total call costs.
If call costs exceed this limit, the device will no longer be able to
dial pay calls.
Note: The actual invoice for calls and services from your
service provider may vary, depending upon network features,
rounding off for billing, taxes, and so forth.
• When this device is used as a GPRS modem, the GPRS log
will be updated automatically.
To set up call costs:
1. Enter the price unit for calculating call cost in the
unit field. The value must be between 0.01 and 9999999.
2. Enter the 3-character name of currency in the
3. Select a Credit status: Unlimited
4. Enter a credit limit in the
must be between 0.01 and 9999999.
Note: The estimated value shown in the Remaining
credit field is for your reference only. The real cost of calling
may vary depending on the service provider the call is made
through.
5. Tap Done.
6. Enter your PIN 2 code and then tap Done.
Price per
Currency
or Limited.
Remaining credit field. The value
field.