Power Management Modes - Dell U2417HWi User Manual

Power Management Modes

If you have VESA's DPM™ compliance display card or software installed in your PC, the
monitor can automatically reduce its power consumption when not in use. The following
table shows the power consumption and signaling of this automatic power saving
feature.
VESA Modes Horizontal
Normal Active
operation
Wireless Inactive
Standby mode
Switch off -
Energy Star
On Mode
NOTE: This monitor is ENERGY STAR
The OSD functions only in the normal operation mode. When any button is pressed
under HDMI mode (with Auto Select function turned Off), the following message will be
displayed:
Activate the computer and the monitor to gain access to the OSD.
* Zero power consumption in OFF mode can only be achieved by disconnecting the
main cable from the monitor.
** Maximum power consumption with max luminance.
*** Energy consumption (On Mode) is tested at 230 Volts / 50 Hz.
This document is informational only and reflects laboratory performance. Your product
may perform differently, depending on the software, components and peripherals you
ordered and shall have no obligation to update such information. Accordingly, the
Vertical
Sync Sync
Active
Inactive
-
Power Consumption
18 W***
Video Power
Indicator
Active White
Blanked White (Breathing)
- Off
®
-compliant.
About Your Monitor
Power
Consumption
60 W (maximum)**
25 W (typical)
Less than 3 W
(Network Standby)
Less than 0.3 W
15
|