Trouble - Canon FS46 Instruction Manual

Trouble?

Troubleshooting
If you have a problem with your camcorder, refer to this section.
Sometimes what you think is a malfunction of the camcorder may
have the simplest of solutions - please read the "CHECK THIS FIRST"
box before going on to the more detailed problems and solutions.
Consult your dealer or a Canon Service Center if the problem persists.
CHECK THIS FIRST
Power supply
• Is the battery charged? Is the compact power adapter correctly con-
nected to the camcorder? (
Recording
• Did you turn the camcorder on and correctly set it to recording
mode? (
rectly inserted into the camcoder? (
Playback
• Did you turn the camcorder on and correctly set it to playback
mode? (
card, is one correctly inserted into the camcorder? (
contain any recordings?
Power source
The camcorder will not turn on or it turns off by itself.
- The battery pack is exhausted. Replace or charge the battery pack.
- Remove the battery pack and reattach it correctly.
Cannot charge the battery pack.
- Make sure the camcorder is off so charging can start.
- The temperature of the battery pack is outside the charging range. If the battery pack's tem-
perature is below 0 °C, warm it before charging it; if it is above 40 °C, let the battery pack
cool down before charging it.
- Charge the battery pack in temperatures between 0 °C and 40 °C.
- The battery pack is faulty. Replace the battery pack.
- The camcorder cannot communicate with the battery pack attached. Such battery packs
cannot be charged using this camcorder.
A noise can be heard from the compact power adapter.
- A faint sound can be heard while the compact power adapter is connected to a power outlet.
This is not a malfunction.
Downloaded From VideoCamera-Manual.com Manuals
98
Additional Information
21) If you are recording on a memory card, is one cor-
39, 70) If you are playing back recordings from a memory
15)
30)
30) Does it