Copying Scenes To A Memory Card - Canon FS46 Instruction Manual

The video from the division point to the end of the scene will appear as
a new scene in the index screen.
NOTES
• When advancing/reversing frames while dividing the scenes, the inter-
val will be 0.5 second.
• If the scene cannot be divided at the point where you paused the play-
back, advance/reverse a frame and then divide the scene.
• During the playback of a scene that was divided, you may notice some
anomalies in the picture/sound at the point where the scene was cut.
• The following scenes cannot be divided:
- Scenes included in the scene pre-selection (marked with a
checkmark). Remove the selection mark in advance.
- Video snapshot scenes and other scenes that are too short (less than
3 seconds).
- Scenes that were edited using the supplied PIXELA's software and
were then written back to a memory card connected to a computer.
• Scenes cannot be divided within 2 seconds from the beginning or the
end of the scene.

Copying Scenes to a Memory Card

You can copy original movies or the entire playlist only from the built-in
memory to the corresponding location on the memory card. See
Photos to a Memory Card
memory card.
Operating modes:
Copying Original Movies
1 Open the [Movies] or [Video Snapshot] index screen for original
scenes recorded in the built-in memory.
Select the
2 Select (
card, or a scene recorded on the date you want to copy.
This step is not necessary to copy all scenes or previously selected
scenes.
3 Copy the scenes.
Downloaded From VideoCamera-Manual.com Manuals
66
Video
(
tab under the
, ) the scene you want to copy to the memory
74) for details on copying photos to the
icon.
Copying