Canon FS46 Instruction Manual page 85

required to use Eye-Fi cards in many countries or regions. Without
approval, use of the card is not permitted. If it is unclear whether the
card has been approved for use in the area, please check with the card
manufacturer.
• Do not use Eye-Fi cards on airplanes and in other places where wire-
less communication is forbidden. Remove the Eye-Fi card from the
camcorder beforehand.
NOTES
• Depending on the amount of data to be transferred or wireless signal
conditions, uploading may take a long time. In addition, if wireless sig-
nal conditions worsen, uploading may be interrupted.
• Wireless transfer will decrease the effective usage time of the battery
pack. You can power the camcorder using the compact power adapter
so the battery pack will not be consumed.
• While files are being uploaded, the camcorder's automatic power off
function will be disabled.
• The ACCESS indicator may flash periodically while the Eye-Fi card is in
use.
• Wireless transfer is available only in playback mode. Any wireless trans-
fer in progress will be stopped if you set the camcorder to recording
mode.
• You can turn off the wireless communication with the
Communication]* setting.
• If the LOCK switch on the Eye-Fi card is set to prevent writing, you
cannot change the [Eye-Fi Communication] setting. In such case, the
icon will appear on the screen. Change the position of the LOCK
switch to change the setting.
* This menu option will appear only when using an Eye-Fi card.
Downloaded From VideoCamera-Manual.com Manuals
External Connections
[Eye-Fi
85