Connect Optional Device(S); Connect Pin Pad, Smart Card Reader, Or Bar Code Wand - VeriFone Omni 3200SE Installation Manual

Table of Contents

Advertisement

Connect
Optional
Device(s)
CAUTION
NOTE
Connect PIN Pad,
Smart Card
Reader, or Bar
Code Wand
The Omni 3200
/3210
SE
for use with electronic point-of-sale terminals. Use the two communication ports
on the back panel to connect up to two optional devices. To order cables to
connect peripheral devices, refer to
Before connecting any peripheral device, remove the power cord from the back of
the terminal and be sure the LED indicator is not lit. Reconnect the power cord
only after finishing connection of peripheral device(s).
For complete information about peripheral installation and use, refer to the user
documentation supplied with those devices.
The following sections discuss the most common optional devices supported by
this terminal.
Table 2
Optional Devices Supported
Optional Device
Bar code
CR 600
Console
External LAN
PIN pad
RS232 Electronic Cash Register
Other optional devices may be supported. For more information, please contact
your VeriFone distributor.
RS232-type devices do not work with the PIN pad port; PIN pad-type devices do
not work with the RS232 port. If an optional peripheral device does not function
correctly, check the port connection.
To Connect PIN Pad, Smart Card Reader, or Bar Code Wand
1
If necessary, insert the small modular plug on one end of the PIN pad cable
into the PIN pad's modular jack.
For a bar code wand, connect the converter cable (VPN - 07411-xx) to the bar
code wand cable.
2
If installing a PINpad 101, PINpad 201 or PINpad 1000, position and insert the
grommet to secure the cable connection.
If a cable is not already connected to the smart card reader or PINpad 501,
insert the small modular plug on one end of the interface cable into the
optional device's modular jack.
3
Insert the larger MOD10 connector on the other end of the PIN pad cable into
the PIN pad port on the terminal's back panel.
terminal supports many peripheral devices designed
SE
Accessories and
Connection Port
PIN pad
RS232
PIN pad
RS232
PIN pad
RS232
T
ERMINAL

Connect Optional Device(s)

Documentation.
I
G
NSTALLATION
UIDE
S
ETUP
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Omni 3210se

Table of Contents