Polaris 600 IQ Racer Owner's Manual page 47

PRE-RIDE INSPECTIONS
Before Starting the Engine
n Parking Brake Lever Lock
Use the parking brake lever lock
Parking
Brake
only when you want the machine
Brake Lock
Lever
to remain stationary; for exam-
ple, when parked on an incline
for a period of five minutes or
less.
Lock Engagement
To engage the lock, squeeze the
brake lever tightly and push for-
ward on the lock. Hold the lock
forward while releasing the
brake lever.
TIP: If the brake lever is squeezed tightly enough, the lock will move freely into
place. Do not force the lock or it may break.
The brake light will illuminate if the parking brake lever lock is set
while the engine is running. It will also illuminate when the service
brake is in use. If the parking brake light does not come on when the
parking brake or service brake is in use, have it serviced by your dealer.
Lock Release
To release the lock, squeeze the brake lever tightly. The lock will return
to the unlocked position.
WARNING! If the parking brake lever lock is partially or entirely engaged while
riding, the brakes may overheat, resulting in brake damage. In extreme cases it
could cause a fire, which could result in serious injury or death. Always ensure
that the lever lock is completely disengaged before operating the snowmobile.
43