Front Suspension Adjustments; Shock Absorber Components - Polaris Frontier Classic Owner's Manual

THE PERFECT FIT

Front Suspension Adjustments

Always verify ski alignment before making adjustments to the IFS.
See page 107 to check alignment. If the skis are misaligned, see
your dealer, as the camber adjustment may also be affected.
For the best ride, the suspension should be adjusted to use the full
travel of the shocks with occasional light bottoming. To determine if
your machine is using full travel, push the jounce bumper down on the
shock rod until it contacts the body and test ride the machine. The
bumper will move up on the rod in relation to the amount of travel that
was used during the ride. If the travel is full, the bumper will be seated
at the top of the rod.

Shock Absorber Components

1. Retainer
2. Shock Rod
3. Jounce Bumper
4. Body
5. Threaded Spring Preload Adjuster Nut
34
WARNING
1
2
3
4
5