Quick Setup; Status - TP-Link re210 User Manual

Firmware Version - This field displays the current firmware version of the Range Extender.

Hardware Version - This field displays the current hardware version of the Range Extender.

Connection Status to Existing Network (2.4GHz or 5GHz) - This part shows you the

current information of the root wireless network which the device is connecting to.
Main Router/AP WiFi Network Name (SSID) - It shows the name of the wireless

network which your device is connecting to.
Signal Strength - It shows the root wireless network's signal strength that the device has

received.
Connection Status - It shows whether your device has been connected to a wireless

network currently. "Connected" means the range extender have connected to a wireless
network, while if it shows "disconnected", you can click "connect" to connect.
Range Extender Status (2.4GHz or 5GHz) - These are the current wireless settings or

information of the device.
Range Extender WiFi Network Name (SSID) - The Device's wireless network name

(SSID) which your PC or other device can be connected to.
Range Extender MAC Address - The physical address of the system, as seen from the

Network -> LAN page.
Channel - The current wireless channel in use.

Channel Width - The bandwidth of the wireless channel.

Wired - The following is the information of Wired LAN. You can configure them in the

Network page.
Range Extender MAC Address - The physical address of the system, as seen from the

Network -> LAN page.
Range Extender IP Address - The IP address of the wired LAN.

Subnet Mask - The subnet mask associated with IP address.

Traffic Statistics - The system traffic statistics.

Received (Bytes) - Traffic that counted in bytes has been received from wireless.

Received (Packets) - Traffic that counted in packets has been received from wireless.

Sent (Bytes) - Traffic that counted in bytes has been sent out from wireless.

Sent (Packets) - Traffic that counted in packets has been sent out from wireless.

System Up Time - The length of the time since the device was last powered on or reset.

Click the Refresh button to get the latest status and settings of the device.

4.2 Quick Setup

Please refer to Chapter 3 Quick Installation
RE210 AC750 Wi-Fi Range Extender User Guide
Guide.
11