c1caus.frm Page 15 Thursday, December 19, 1996 12:46 PM
Receiving a Call
When there is an incoming call, the phone will give a ringing tone
and the CALL message will flash on the display.
If you have set the menu function Ringing Volume to SILENT
•
SERVICE, the keypad and display lights will flash, the CALL
message will flash on the display and only a short beep tone
will be given.
You can answer a call any time, even while using the memory
or menu functions.
To answer a call:
Press the SEND key or any key except PWR and lift the phone
to your ear.
Note: If the Keyguard is activated, a call can only be answered
by pressing the SEND key.
To end a call, press the END key.
If you don't answer a call, the message 1 CALL MISSED or NN
•
CALLS MISSED will remain on the display until you press any
key (except PWR) to clear the display.
Adjusting the Earpiece Volume
The volume of the earpiece can be con-
trolled by scrolling the
call. Press
to increase and
crease the volume level.
Note: This key acts as a scrolling key for
the memory and the menu functions when not in a call.
key during a
to de-
15