Dell Inspiron 580s Service Manual page 35

Displays the amount of processor Level 1 cache.
Processor L1 Cache
Displays the amount of processor Level 2 cache.
Processor L2 Cache
Displays the amount of processor Level 3 cache.
Processor L3 Cache
Indicates the amount of installed memory.
Memory Installed
Indicates the amount of available memory.
Memory Available
Indicates the frequency of installed memory.
Memory Speed
Indicates the type of installed memory.
Memory Technology
Standard CMOS Features
Displays current date in the format (mm:dd:yyyy).
System Date
Displays current time in the format (hh:mm:ss).
System Time
Displays the SATA drives connected to the SATA1 connector.
SATA-1
Displays the SATA drives connected to the SATA2 connector.
SATA-2
Displays the SATA drives connected to the SATA3 connector.
SATA-3
Displays the SATA drives connected to the SATA4 connector.
SATA-4
Advanced BIOS Features
CPU Feature
USB Device Setting
Advanced Chipset Features
Enabled; Disabled (Enabled by default)
Onboard Audio Controller
Enabled; Disabled (Enabled by default)
Onboard LAN Controller
Enabled; Disabled (Disabled by default)
Onboard LAN Boot ROM
Boot Device Configuration
Boot Settings
Configuration
Used to set the device priority of hard drives. The items displayed are dynamically updated according to the hard drives
Hard Disk Boot Priority
detected.
Used to set the device priority of CD/DVD drives. The items displayed are dynamically updated according to the CD/DVD drives
CD/DVD Drives Boot
detected.
Priority
Removable; CD/DVD; Hard Drive; Disabled (Hard Drive by default)
1st Boot Device
Removable; CD/DVD; Hard Drive; Disabled (CD/DVD by default)
2nd Boot Device
Removable; CD/DVD; Hard Drive; Disabled (Removable by default)
3rd Boot Device
Power Management Setup
S1; S3 (S3 by default)
ACPI Suspend Type
Enabled; Disabled (Enabled by default)
Remote Wake Up
Power Off; Power On; Last Power State (Power Off by default)
AC Recovery
Enabled; Disabled (Disabled by default)
Auto Power On
0
Auto Power On Date
0:00:00
Auto Power On Time
BIOS Security Features
Indicates if the supervisor password is set or clear.
Supervisor password
Indicates if the user password is set or clear.
User password
Press <Enter> to set the supervisor password.
Set Supervisor Password
No Access; View Only; Limited; Full Access (Full Access by default)
User Access Level
Press <Enter> to set the user password.
Set User Password
Setup; Always (Setup by default)
Password Check
Hyper-Threading Technology — Enabled; Disabled (Enabled by default)
l
®
Intel SpeedStep — Enabled; Disabled (Enabled by default)
l
Virtualization — Enabled; Disabled (Disabled by default)
l
Limit CPUID Value — Enabled; Disabled (Disabled by default)
l
CPU XD Support — Enabled; Disabled (Enabled by default)
l
Multi Core Support — Enabled; Disabled (Enabled by default)
l
Intel TurboMode tech — Enabled; Disabled (Enabled by default)
l
USB Controller — Enabled; Disabled (Enabled by default)
l
Numlock Key — On; Off (On by default)
l
Keyboard Errors — Report; Do Not Report (Report by default)
l