Data Transfer; Transfer Contact List; Data Transfer With A Compatible Device; Synchronize From A Pc - Nokia 6300 User Manual

Nokia cell phone user's guide
Hide thumbs Also See for 6300:
Table of Contents

Advertisement

S e t t i n g s
point, enter a name to change the access point settings, and select OK. Select
(APN) to establish a connection to a network, and select OK.
You can also set the EGPRS dial-up service settings (access point name) on your PC using the Nokia Modem Options software.
See "Nokia PC Suite," p. 40.

Data transfer

Synchronize your calendar, contacts data, and notes with another compatible device (for example, a mobile device), a compatible
PC, or a remote internet server (network service).
Your device allows data transfer with a compatible PC or another compatible device when using the device without a SIM card.

Transfer contact list

To copy or synchronize data from your device, the name of the device and the settings must be in the list of transfer contacts.
If you receive data from another device (for example, a compatible mobile device), the corresponding transfer contact is
automatically added to the list, using the contact data from the other device.
original items in the list.
To add a new transfer contact to the list (for example, a mobile device), select
transfer
Options
Add transfer contact
>
>
the transfer type.
To edit the copy and synchronize settings, select a contact from the transfer contact list and
To delete a transfer contact, select it from the transfer contact list and

Data transfer with a compatible device

For synchronization use Bluetooth wireless technology or a cable connection. The other device must be activated for receiving
data.
To start data transfer, select
Server sync
or
PC
synchronisation.
According to the settings, the selected data is copied or synchronized.

Synchronize from a PC

To synchronize data from calendar, notes, and contacts, install the Nokia PC Suite software of your device on a compatible PC.
Use Bluetooth wireless technology or a USB data cable to connect your device with the PC and start the synchronization from
the PC.

Synchronize from a server

To use a remote internet server, subscribe to a synchronization service. For more information and the settings required for this
service, contact your service provider. You may receive the settings as a configuration message.
service," p. 7.
1. To start the synchronization from your device, select
2. Depending on the settings, select
Synchronizing for the first time or after an interrupted synchronization may take up to 30 minutes to complete.

USB data cable

You can use the USB data cable to transfer data between the device and a compatible PC or a printer supporting PictBridge. You
can also use the USB data cable with Nokia PC Suite.
To activate the device for data transfer or image printing, connect the data cable. Confirm
mode." and select from the following options:
Nokia mode
— to use the cable for PC Suite
Printing & media
— to use the device with a PictBridge compatible printer or with your compatible PC
Data storage
— to connect to a PC that does not have Nokia software and use the device as a data storage device
To change the USB mode, select

Call

Select
Menu
Settings
>
>
Call divert
— to divert your incoming calls (network service). You may not be able to divert your calls if some call barring
functions are active.
See "Security," p. 28.
© 2007 Nokia. All rights reserved.
If you have set the settings both on your PC and on your device, the PC settings are used.
Phone synchronisation
>
Menu
Settings
Connectivity
>
>
Initialising synchronisation
Menu
Settings
>
>
Call
and from the following options:
Packet data acc.
or
Phone
Options
Data transfer
>
Menu
Settings
Connectivity
>
>
or
Initialising
Connectivity
USB data cable
>
26
pt., enter the access point name
Server sync
and
PC synchronisation
Menu
Settings
Connectivity
>
>
copy, and enter the settings according to
Options
> Edit.
> Delete.
and the transfer contact from the list other than
See "Configuration setting
Data transfer
>
copy.
"USB data cable connected. Select
and the desired USB mode.
are the
Data
>
Server
sync.
>

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents