Settings; The Initial Settings Procedure - Samsung HT-E6750W User Manual

Settings

The Initial Settings Procedure

• The Home menu will not appear if you do not configure
the initial settings.
• The OSD (On Screen Display) may change in this
product after you upgrade the software version.
• The access steps may differ depending on the menu
you selected.
1 . Turn on your TV after connecting the product,
and then turn on the product. When you turn
on the product for the first time, the product
automatically displays the Initial Settings
Language screen.
2 . Use the ▲▼◄► buttons on the remote
to select the desired language, and then
press the v button twice. The Start screen
appears.
3 . Press the v button to start setup. The Network
Settings screen appears.
Initial Settings > Network Settings (1/5)
The next step is to set up a wireless network using an
internal LAN Adapter.
If you want to connect to your wired network, plug in a
network cable.
4 . Press the v button to set up the product's
wired network connecton or select Skip, and
then press the v button to skip network setup.
If you selected Skip, go to Step 12.
| NOTE |
\ The product starts the wireless network connection
procedure by default. If you want to set up a wired
connection, select Skip, and then go to "Configuring
Your Network Connection" on page
completed the Initial Settings Procedure.
\ If you skip wireless network setup here, go to "Wireless
Network" on page
network connection later.
5 . The product searches for and then displays all
available wireless router network connections.
Initial Settings > Network Settings (2/5)
Select your wireless router from the list.
KIMING_VTOWER
TIAS
si-ap
surlwang5
Add Network
6 . Use the ▲▼ buttons to select a router, and
then press the v button. The Next button is
Previous
highlighted.
Next
7 . Press the v button to continue. The Security
Skip
Key screen appears.
| NOTE |
\ If you have a WPS(PBC) compatible router, select
WPS(PBC) instead, press the v button, and then follow the
directions on the screen. When done, go to Step 10.
32 after you have
33 to set up the product's wireless
1 / 4
Refresh
WPS(PBC)
Previous
Next
Skip
23
English
|