Radio; Cd/Usb/Ipod/Aux - Pioneer DXT-X2769UI Owner's Manual

4 speaker car audio sysytem package cd receiver with direct ipod and iphone control two 6-1/2 2-way speakers and two 6 x 9 3-way speakers
Table of Contents

Advertisement

Available languages

Available languages

Menu Item
Description
[SUB.W/SUB.W]
Select when there is a passive subwoofer connected directly to
the rear speaker output leads and there is a subwoofer
connected to the RCA output.
[REAR/REAR]
Select when there are full-range speakers connected to the rear
speaker output leads and RCA output. If there is a full-range
speaker connected to the rear speaker output leads, and the
RCA output is not used, you may select either [REAR/SUB.W] or
[REAR/REAR].
SYSTEM RESET
Select [YES] to initialize the unit settings. The unit will be
restarted automatically.
[YES], [CANCEL]
(Some of the settings may be retained even after resetting the
unit.)

Radio

The tuner frequencies on this unit are allocated for use in North America. Use in other
areas may result in poor reception.
Receiving preset stations
1
Press SRC/OFF to select [RADIO].
2
Press BAND/
to select the band from [FM1], [FM2], [FM3] or [AM].
3
Press a number button (1/
TIP
The
/
buttons can be also used to select a preset station when [SEEK] is set to [PCH] in the
FUNCTION settings (page 9).
Best stations memory (BSM)
The six strongest stations are stored on the number buttons (1/
1
After selecting the band, press the M.C. dial to display the main menu.
2
Turn the M.C. dial to select [FUNCTION], then press to confirm.
3
Turn the M.C. dial to select [BSM], then press to confirm.
6
En
to 6/
).
to 6/
To seek a station manually
1
After selecting the band, press
Press and hold
when the unit receives a station. To cancel seek tuning, press
NOTE
[SEEK] needs to be set to [MAN] in the FUNCTION settings (page 9).
To store stations manually
1
While receiving the station you want to store, press and hold one of the number
buttons (1/

CD/USB/iPod/AUX

Playing back
Disconnect headphones from the device before connecting it to the unit.
(eject)
M.C. (multi-control) dial
SRC (source)/OFF
).
CD
1
Insert a disc into the disc loading slot with the label side up.
To eject a disc, stop playback first then press
/
to select a station.
/
then release to seek an available station. Scanning stops
to 6/
) until it stops flashing.
Disc loading slot
AUX input jack (3.5 mm stereo jack)
.
/
.
USB port

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents