Detaching The Front Panel; Initial Settings - Pioneer DXT-X2769UI Owner's Manual

4 speaker car audio sysytem package cd receiver with direct ipod and iphone control two 6-1/2 2-way speakers and two 6 x 9 3-way speakers
Table of Contents

Advertisement

Available languages

Available languages

Display indication
Indication
Description
Appears when a lower tier of the menu or folder exists.
Appears when the
button is pressed.
Appears when the local seek tuning function is set (page 9).
Appears when the sound retriever function is set (page 10).
Appears when random/shuffle play is set.
Appears when repeat play is set.
Appears when the iPod control function is set (page 8).

Detaching the front panel

Detach the front panel to prevent theft. Remove any cables and devices attached to the
front panel and turn off the unit before detaching it.
Detach
Important
• Avoid subjecting the front panel to excessive shock.
• Keep the front panel out of direct sunlight and high temperatures.
• Always store the detached front panel in a protective case or bag.
Setting the clock (CLOCK SET)
When you turn the ignition switch to ON after installation, [SET UP :YES] appears in the
display.
1
2
3
4
NOTES
• You can cancel the menu setting by pressing SRC/OFF.
• This setting can be made at any time. See page 10 for more details.
Attach
Canceling the demonstration display (DEMO OFF)
1
2
3
4

INITIAL settings

1
2
3
4
Menu Item
SP-P/O MODE
Press the M.C. dial.
The setup menu disappears after 30 seconds of no operation. If you prefer not to set
at this time, turn the M.C. dial to select [NO], then press to confirm.
Turn the M.C. dial to adjust the hour, then press to confirm.
The indicator moves to the minute setting automatically.
Turn the M.C. dial to adjust the minute, then press to confirm.
[QUIT] appears.
Turn the M.C. dial to select [YES], then press to confirm.
Press the M.C. dial to display the main menu.
Turn the M.C. dial to select [SYSTEM], then press to confirm.
Turn the M.C. dial to select [DEMO OFF], then press to confirm.
Turn the M.C. dial to select [YES], then press to confirm.
Press and hold SRC/OFF until the unit turns off.
Press the M.C. dial to display the main menu.
Turn the M.C. dial to select [INITIAL], then press to confirm.
Turn the M.C. dial to select an option, then press to confirm.
Description
Select when there is a full-range speaker connected to the rear
speaker output leads and there is a subwoofer connected to the
[REAR/SUB.W]
RCA output.
5
En

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents