Nokia 6260 User Manual page 171

Nokia cell phone user's guide
Hide thumbs Also See for 6260:
Table of Contents

Advertisement

1. Open an application where the item you wish to send is stored. For example, to
send a photo to another device, open the Gallery application.
2. Scroll to the item you want to send and select
3. The phone starts to search for devices within range. Devices using Bluetooth
technology that are within range start to appear on the display one by one. You
can see a device icon, the device's name, the device type, or a short name.
Paired devices are shown with
connection already exists between your phone and the other device.
• To interrupt the search, press Stop. The device list freezes and you can start
to form a connection to one of the devices already found.
4. When searching for devices, some devices may show only the unique device
addresses. To find out the unique address of your phone, enter the code
*#2820# in standby mode when the Bluetooth connection is active.
If you have searched for devices earlier, a list of the devices that were found
previously is shown first. To start a new search, select
switch off the phone, the list of devices is cleared and the device search needs
to be started again before sending data.
5. Scroll to the device you want to connect with and press Select. The item you
are sending is copied to Outbox and the note
6. Pairing (if not required by the other device, go to step 7.)
• If the other device requires pairing before data can be transmitted, a tone
sounds and you are asked to enter a passcode.
Copyright © 2004 Nokia. All rights
Options Send Via
. A paired device is one where a Bluetooth
More
Connecting
Bluetooth.
devices. If you
is shown.
171

Advertisement

Table of Contents
loading

Table of Contents