Samsung RF28K907 Series User Manual page 31

To correct the gap between a door and the refrigerator unit (applicable models only)
RF28K907*
CAUTION
The electrical connectors must be left intact during this process. Use caution so you don't
tangle the connector wires or peel off the coating.
Untitled-4 31
Door gaps can be corrected using the
gap bolt on the top right corner of the
refrigerator.
1. With the door closed, use a Philips
screwdriver to remove 6 screws on the
top cover with the wire connectors.
2. Use a 4 mm Allen wrench (not
provided) to correct the door gap
between two doors.
- To widen the gap, turn the gap bolt
clockwise.
- To narrow the gap, turn the gap bolt
counterclockwise.
3. When done, reinsert the top cover.
English 31
2016-01-12 3:59:10