Polaris UTV 2x4 Series 11 Owner's Manual page 86

MAINTENANCE AND LUBRICATION
Seat Belts
Inspect all three seat belts for proper operation before each use of the
vehicle.
1. Push the latch plate into the buckle until it clicks. The latch plate
must slide smoothly into the buckle. A click indicates that it's
securely latched.
2. Push the red button in the middle of the buckle to make sure it
releases freely.
3. Check the belt webbing for wear, cuts or damage. If any
irregularities are found, have the seat belt system checked and/or
replaced by an authorized Polaris dealer.
The UTV seat belt is adjustable and
should be adjusted for both the
operator and passenger before
driving. Although having the belt
at 30° is typical for many people, it
will not accommodate all body
sizes and shapes. Make sure
the seat belt is adjusted to the
lowest possible lap position
before riding.
1. To adjust, loosen the bolts (1).
2. Reposition both the buckle and
retractor. Tighten bolts.
NOTE: The center belt does not self adjust. Before riding, pull on the
strap to secure the belt on the lap of the center passenger.
Failure to follow the age recommendations for this vehicle could
result in serious injury or death. No one under the age of 16 may
operate this vehicle. No one under the age of 5 may ride as a
passenger in this vehicle.
84
WARNING
1