Clutch System; Torque Stop - Polaris 550 Indy Owner's Manual

MAINTENANCE

Clutch System

Periodically inspect clutch sheaves for damage, wear or belt residue. To
maintain optimum performance, clean with non-oil based cleaners such
as isopropyl alcohol.
WARNING! If you become aware of higher than normal clutch engagement or
an unusual vibration or shift pattern, see your dealer immediately. Do not
operate the snowmobile until repairs have been made.
All clutch maintenance and repairs must be performed by an authorized
POLARIS dealer. Any unauthorized modifications to clutches, such as
adding or removing weights, will void the warranty.
NOTICE: The bushings in the weights and rollers of POLARIS clutches are
made of a material that may be damaged if lubricated. Do not
lubricate clutch bushings.

Torque Stop

Periodically check torque stop
clearance. With clutches in
proper alignment, the torque
stop clearance should be .010-
.030 inch (.25-.75 mm) from
the engine case.
Adjust if necessary, and lock
the jam nut.
86
.010-.030 inch
(.25-.75 mm)