TP-Link TL-WPA4220 Quick Installation Manual

Quick Installation Guide
Wi-Fi Powerline Extender
Applicable to TL-WPA4220 and its multiple-pack kits
(This QIG uses the powerline adapter TL-PA4010 as an example to work with TL-WPA4220.)
7106504934 REV4.0.2

Plug and Play

Set Up a New Wireless Network
TL-PA4010
e
r l i n
w e
P o
N
L A
Router
N
W A
TL-WPA4220
2
1
Wait until the powerline
LED turns on.
3
Unify Your Wireless Network via Wi-Fi Clone (Optional)
Set your extender(s) settings to your router's wireless network name and
password.
1
Plug in your extender next to your router
(with WPS enabled).
2
Press the WPS button.
WAN
WPS
WAN WPS LAN
Note: If Wi-Fi Clone succeeds, relocate the extender to your chosen position. If it fails, use "Customize the
Extender's Wireless Settings" on the back instead.
More: To add additional Wi-Fi powerline
device (TL-WPA4220 or others), use the
same setup procedure as the TL-WPA4220.
4
Enjoy!
Select Wi-Fi Name (SSID): TP-LINK_XXXXXX
Enter Wi-Fi Password: XXXXXXXX
Customized Wireless Network Name:
Customized Wireless Password:
Default Wireless Settings
Wi-Fi Name(SSID): TP-LINK_XXXXXX
Wi-Fi Password: XXXXXXXX
Model No. TL-WPA4220
Wi-Fi Information Card included in the package
3
Press the Wi-Fi Clone button.
LAN
Will blink slowly for
a few seconds
4
Done. The extender's wireless
network name and password will
now be the same as your router's.