TP-Link TL-WA801ND Installation Manual page 10

Hide thumbs Also See for TL-WA801ND:

V30"Jqy"fq"K"tguvqtg"o{"Ceeguu"Rqkpv‚u"eqphkiwtcvkqp"vq"kvu"hcevqt{"fghcwnv"ugvvkpiuA

With the Access Point powered on,

use a pin to press and hold the

TGUGV button on the rear panel for

5 to 8 seconds before releasing it.

Hold it in for 5 to 8 seconds

Once the Access Point is reset, the current configuration settings will be lost

Note

and you will need to reconfigure the Access Point.

V40" Yjcv"ecp"K"fq"kh"K"hqtigv"o{"rcuuyqtfA"

Try to use the default user name and password: cfokp, cfokp;

Referring to the file that you have saved in

the device, the file will show you the user name and password that you have

configured.

If the password is still not the correct one, then you can try to restore the Access

Point's configuration to its factory default settings referring to previous section

V3 and try to reconfigure your AP by following the instructions of this QIG.

V50"Yjcv"ecp"K"fq"kh"K"ecppqv"ceeguu"vjg"ygd/dcugf"eqphkiwtcvkqp"rcigA"

Assign a static IP address 192.168.0.100 for your computer first before logging in the

management page. Here takes the procedures in Windows 7 for example."

Go to Uvctv"> Ugvvkpiu > Eqpvtqn"

Rcpgn, and then you will see the

following page.

Click"Xkgy"pgvyqtm"

uvcvwu"cpf"vcumu"

Hkpkuj last time you configured